Lighting Lighting
Sylvania Smart + ZigBee Adjustable Full color A19 LED Smart Bulb $49.99

A colour to suit every mood

Create a colourful in-home ambiance to suit the way you feel. With over 16 million colours, the possibilities are endless!

Marque : Sylvania A19 Smart+ 
Model: 74933 

Download specifications

Note:  
This smart bulb cannot be used with a dimmer or smart switch 
This bulb must not be installed in enclosed fixtures 

$49.99

or from $34.99 with discounts

Discounts on lighting products
25% off when you purchase 3 to 5 products 
30% off when you purchase 6 or more products 

 

Create automations and lighting scenes to personalize the ambiance, based on what you’re doing and when 
 
Set the lighting colour and intensity with the Hilo app, at home or remotely 
 
LED bulb can be set to over 16 million colours 
 
Rated life of 20,000 hours  
 
Smart+ A19 requires a ZigBee compatible home automation hub, like the Hilo hub 
 
Product activation requires an active Wi-Fi network (must be placed in range of wireless router) 
 
2-year limited product warranty 
 
Suitable for use in damp locations 
 
Do not install in totally enclosed fixtures  
 
Not intended for use with dimmers, emergency light fixtures or exit lights 

Pairing a color smart bulb

Do not use a wall switch to turn a smart bulb on or off as it can cause the bulb to unpair from the hub. Smart bulbs should be controlled using the app. We also advise against installing smart bulbs in a fixture with a dimmer or in a three-way lamp.

Only one smart bulb can be paired at a time.

Follow these steps:

1. Turn the bulb on for five seconds, then turn it off.

2. Repeat this step five times, until the bulb turns red, green, blue and then white.

3. Turn the bulb off.

4. In the app, the light bulb tile will indicate that it is offline.

5. Put the hub in pairing mode by pressing the button. The hub indicator light will blink blue.

6. Turn the light bulb on.

7. The bulb will turn red, green and blue, and a few seconds later, it will turn white and blink three times. Leave the bulb on.

8. Wait about 30 seconds, then refresh the Devices screen in the app by swiping your finger down from the top of your screen until the bulb tile appears or is reactivated. Refresh the screen several times, if necessary.

9. Pairing is complete. If no other devices need to be paired, press the button on the hub to exit pairing mode.