The Charter of French language and its regulations govern the consultation of English-language content.
Continue my order

White smart bulb

White smart bulb

Adjust the intensity of your smart lighting based on the mood you want to set, or to aid concentration

Lighting for every activity

 
Brand: Sylvania A19 SMART+
Model: 70552
 

Create automations and lighting scenes to personalize the ambiance, based on what you’re doing and when. 

  • Set your lighting with the Hilo app, at home or remotely.
  • Dimmable soft white LED bulb.
  • Rated life of 20,000 hours.
  • Smart+ A19 requires a ZigBee compatible home automation hub, like the Hilo hub.
  • Suitable for use in damp locations.
  • Not intended for use with dimmers, emergency light fixtures or exit lights.

Please note that Hilo no longer sells smart bulbs, smoke alarms, outlets, light switches, auxiliary switches, dimmers, or Netatmo smart weather stations. However, you still have access to the features of devices already installed in the Hilo app.

 

How to pair a white smart bulb

 
Do not use a wall switch to turn a smart bulb on or off as it can cause the bulb to unpair from the hub. Smart bulbs should be controlled using the app. We also advise against installing smart bulbs in a fixture with a dimmer or in a three-way lamp.
 
Only one smart bulb can be paired at a time.
 
Note: If the lightbulb is new or if it blinks three times when you turn it on the first time at step 1 of the following procedure, go directly to step 3.
 
Follow these steps :
  1. Turn the bulb on for five seconds, then turn it off.
  2. Repeat this step five times until the bulb blinks three times and then stops blinking.
  3. Turn the bulb off.
  4. Go to the Devices page in the app by tapping on the lamp icon at the bottom of the screen.
  5. Tap on the + in the upper right corner.
  6. Tap on Add a device.
  7. Tap on Bulb, smart plug switch.
  8. Tap on I don’t have a Data Matrix code.
  9. Tap on Continue – This action will put the hub in pairing mode. The indicator light on the hub will blink blue.
  10. Turn the light bulb on.
  11. It will blink three times, and then a few seconds later, it will blink again three times. Leave the bulb on.
  12. In the app, tap on Close when you see The device(s) have been added! The Devices page will be displayed again.
  13. Wait about 60 seconds, until the smart bulb’s tile appears or is reactivated in the app.
  14. Pairing is complete. If no other devices need to be paired, press the button on the hub to exit pairing mode.