The Charter of French language and its regulations govern the consultation of English-language content.

Products

How to pair a smart plug

To pair a smart switch, follow these steps:

  1. Go to the Devices page in the app by tapping on the lamp icon at the bottom of the screen.
  2. Tap on the + in the upper right corner.
  3. Tap on Add a device.
  4. Tap on Thermostat, in-wall switch, etc.
  5. Tap on I don’t have a Data Matrix code.
  6. Tap on Continue – This action will put the hub in pairing mode. The indicator light on the hub will blink blue.
  7. Press the button on the smart plug and hold it down while plugging the smart plug into the outlet.
  8. Once the smart plug is plugged into the outlet, release the button.
  9. The light on the button will blink blue three times, indicating that the smart plug is now paired with the hub.
  10. In the app, tap on Close when you see The device(s) have been added! The Devices page will be displayed again.
  11. Wait about 60 seconds, until the smart plug’s tile appears or is reactivated in the app.
  12. Switch on the smart plug from the app.
  13. Pairing is complete. If no other devices need to be paired, press the button on the hub to exit pairing mode.