The Charter of French language and its regulations govern the consultation of English-language content.

Full color smart bulb

Full color smart bulb

Create a colourful in-home ambiance to suit the way you feel. With over 16 million colours, the possibilities are endless

A colour to suit every mood


Brand : Sylvania A19 Smart+
Model: 74933

Create programs and lighting scenes to customize your mood for different situations and times of day

  • Set the lighting colour and intensity with the Hilo app, at home or remotely
  • LED bulb can be set to over 16 million colours
  • Rated life of 20,000 hours 
  • Smart+ A19 requires a ZigBee compatible home automation hub, like the Hilo hub
  • Product activation requires an active Wi-Fi network (must be placed in range of wireless router)
  • Suitable for use in damp locations  
  • Not intended for use with dimmers, emergency light fixtures or exit lights 

Download specifications

Please note that Hilo no longer sells the smart bulbs, Netatmo weather station or smoke detector. However, if you already have one of these devices in your home, you can still change the settings for bulbs and read data from the Netatmo station and smoke detector in the Hilo application.



How to pair a color smart bulb

Do not use a wall switch to turn a smart bulb on or off as it can cause the bulb to unpair from the hub. Smart bulbs should be controlled using the app. We also advise against installing smart bulbs in a fixture with a dimmer or in a three-way lamp.

Only one smart bulb can be paired at a time.

Follow these steps:
  1. Turn the bulb on for five seconds, then turn it off.
  2. Repeat this step five times, until the bulb turns red, green, blue and then white.
  3. Turn the bulb off.
  4. Go to the Devices page in the app by tapping on the lamp icon at the bottom of the screen.
  5. Tap on the + in the upper right corner.
  6. Tap on Add a device.
  7. Tap on Bulb, smart plug switch.
  8. Tap on I don’t have a Data Matrix code.
  9. Tap on Continue – This action will put the hub in pairing mode. The indicator light on the hub will blink blue.
  10. Turn the light bulb on.
  11. The bulb will turn red, green and blue, and a few seconds later, it will turn white and blink three times. Leave the bulb on.
  12. In the app, tap on Close when you see The device(s) have been added! The Devices page will be displayed again.
  13. Wait about 60 seconds, until the smart bulb’s tile appears or is reactivated in the app.
  14. Pairing is complete. If no other devices need to be paired, press the button on the hub to exit pairing mode.